BTPMS - W.E. STAMPING INK

  • MSDS: BTPMS
  • Manufacturer: SUN CHEMICAL CORP
  • Product Name: W.E. STAMPING INK
  • National Stock Number: 7510-00F034684
Product Identification

Product ID:W.E. STAMPING INK
MSDS Date:07/29/1985
FSC:7510
NIIN:00F034684
MSDS Number: BTPMS

Responsible Party
SUN CHEMICAL CORPORATION
631 CENTRAL AVE
CARLSTADT, NJ 07072
US

Emergency Phone: 201-933-4500

Info Phone: 201-933-4500

Cage: SUNCH

Contractor
SUN CHEMICAL CORPORATION
PORTLAND, OR 97218 US

Telephone: 201-933-4500

Cage: SUNCH

Ingredients

DIETHYLENE GLYCOL MONOBUTYL ETHER ACETATE

CAS: 124-17-4

RTECS: KJ9275000

Fraction By Weight: N/GIVEN

Hazards

LD50 LC50 Mixture:NOT KNOWN.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYE/SKIN:MILD IRRITATION. CAN BE
ABSORBED THROUGH SKIN IN TOXIC AMOUNTS. INHAL:BREATHING HEATED
VAPORS CAN BE IRRITATING TO RESPIRATORY TRACT.
INGEST:GASTROINTESTINAL IRRITATION. CHRONIC:SKIN AB SORPTION MAY
CAUSE LIVER AND KIDNEY DAMAGE.
Effects of Overexposure:SKIN/EYE:IRRITATION. INHAL/INGEST:NAUSEA,
VOMITING. THE HAZ INGREDIENT LISTED IN MSDS (DIETHYLENE GLYCOL
BUYTYL ETHER ACETATE) HAS BEEN REPORTED IN ANIMAL STUDIES TO CAUSE
DAMAGE TO LIVER AND KIDNEY.
Medical Cond Aggravated by Exposure:NONE GIVEN.

First Aid

First Aid:EYE:FLUSH W/WATER FOR 15MINS. SKIN:WASH W/SOAP & WATER.
REMOVE ANY CONTAMINATED CLOTHING. INHAL:REMOVE TO FRESH AIR. IF
NECESSARY ADMINISTER OXYGEN AND CONSULT A PHYSICIAN. INGEST:GIVE 2
GLASSES OF WA TER, INDUCE VOMITING AND IMMED CONSULT A PHYSICIAN.

Fire Fighting

Flash Point Method:OC
Flash Point:240F,116C
Lower Limits:0.76
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, ALCOHOL FOAM.
Fire Fighting Procedures:SELF CONTAINED BREATHING APPARATUS AND
PROTECTIVE CLOTHING SHOULD BE WORN IN CHEMICAL FIRES.
Unusual Fire/Explosion Hazard:NONE REPORTED.

Accidental Release

Spill Release Procedures:CLEAN UP WITH ABSORBENT MATERIAL.
Neutralizing Agent:NOT GIVEN.

Handling

Handling and Storage Precautions:KEEP CONTAINERS CLOSED AND AWAY FROM
EXCESSIVE HEAT.
Other Precautions:AVOID SKIN CONTACT.

Exposure Controls

Respiratory Protection:A RESPIRATOR SHULD BE WORN WHEN PROLONGED
EXPOSURE TO VAPOR OR MIST CAN OCCUR.
Ventilation:IN ACCORDANCE WITH GOOD ENGINEERING PRACTICES.
Protective Gloves:IMPERVIUS GLOVES.
Eye Protection:SAFETY GLASSES OR GOGGLES.
Other Protective Equipment:NONE.
Work Hygienic Practices:WASH HANDS THOROUGHLY AFTER HANDLING. WASH
CONTAMINATED CLOTHING PRIOR TO REUSE.
Supplemental Safety and Health

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:474F,246C
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN BUTYL ACETATE
Appearance and Odor:COLORED VISCUS LIQUID WITH OILY ODOR.
Percent Volatiles by Volume:7

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR ALKALIES.
Stability Condition to Avoid:EXCESSIVE HEAT.
Hazardous Decomposition Products:NOT KNOWN.

Disposal

Waste Disposal Methods:IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.